Sorry, you need to enable JavaScript to visit this website.


General Electric

Advanced Medium VoltageSiC-SJ FETS With Ultra-Low On-Resistance

GE Global Research will develop a device architecture for the world's first high-voltage silicon carbide (SiC) super junction (SJ) field-effect transistors. These devices will provide highly efficient power conversion (such as from direct to alternating current) in medium voltage applications, including renewables like solar and wind power, as well as transportation. The transistors will scale to high voltage while offering up to 10 times lower losses compared to commercial silicon-based transistors available today.

General Electric

CO2 Capture Process Using Phase-Changing Absorbents

General Electric (GE) Global Research and the University of Pittsburgh are developing a unique CO2 capture process in which a liquid absorbent changes into a solid upon contact with CO2. Once in solid form, the material can be separated and the CO2 can be released for storage by heating. Upon heating, the absorbent returns to its liquid form, where it can be reused to capture more CO2. The approach is more efficient than other solvent-based processes because it avoids the heating of extraneous solvents such as water. This ultimately leads to a lower cost of CO2 capture and will lower the additional cost to produce electricity for coal-fired power plants that retrofit their facilities to include this technology.

General Electric

Resilient Multi-Terminal HVDC Networks with High-Voltage High-Frequency Electronics

General Electric (GE) Global Research is developing electricity transmission hardware that could connect distributed renewable energy sources, like wind farms, directly to the grid--eliminating the need to feed the energy generated through intermediate power conversion stations before they enter the grid. GE is using the advanced semiconductor material silicon carbide (SiC) to conduct electricity through its transmission hardware because SiC can operate at higher voltage levels than semiconductors made out of other materials. This high-voltage capability is important because electricity must be converted to high-voltage levels before it can be sent along the grid's network of transmission lines. Power companies do this because less electricity is lost along the lines when the voltage is high.

General Electric

Inline Gas Discharge Tube Breaker for Meshed MVDC Grids

GE Research will develop a medium voltage direct current (MVDC) circuit breaker using gas discharge tubes (GDTs) with exceptionally fast response time. GDTs switch using no mechanical motion by transitioning the internal gas between its ordinary insulating state and a highly conductive plasma state. The team will develop a new cathode and control grid to reduce power loss during normal operation and meet program performance and efficiency targets. A fast MVDC breaker is an important component in uprating existing AC distribution corridors in congested urban areas to MVDC, and connecting distributed renewable energy sources to a growing number of high-power applications.

General Electric

Microstructured Fiber for Infrared Absorption Measurements of Methane Concentration

General Electric (GE) Global Research will partner with Virginia Tech to design, fabricate, and test a novel, hollow core, microstructured optical fiber for long path-length transmission of infrared radiation at methane absorption wavelengths. GE will drill micrometer-sized side-holes to allow gases to penetrate into the hollow core. The team will use a combination of techniques to quantify and localize the methane in the hollow core. GE's plans to develop fibers that can be designed to fit any natural gas system, providing flexibility to adapt to the needs of a monitoring program in a wide variety of places along the natural gas value chain, including transmission and gathering pipelines. GE anticipates that the fiber detector will be cost competitive with other highly selective methane detectors, and therefore offer innovative capabilities for more cost effective methane monitoring.

General Electric

Nanostructured Scalable Thick-Film Magnetics

Magnetic components are typically the largest components in a power converter. To date, however, researchers haven't found an effective way to reduce their size without negatively impacting their performance. And, reducing the size of the converter's other components isn't usually an option because shrinking them can also diminish the effectiveness of the magnetic components. General Electric (GE) Global Research is developing smaller magnetic components for power converters that maintain high performance levels. The company is building smaller components with magnetic films. These films are created using the condensation of a vaporized form of the magnetic material. It's a purely physical process that involves no chemical reactions, so the film composition is uniform. This process makes it possible to create a millimeter-thick film deposition over a wide surface area fairly quickly, which would save on manufacturing costs. In fact, GE can produce 1-10 millimeter-thick films in hours. The magnetic components that GE is developing for this project could be used in a variety of applications, including solar inverters, electric vehicles, and lighting.

General Electric

Charge-Balanced SiC FETs for Breakthrough Power Conversion

The team led by General Electric (GE) Global Research will develop a new high-voltage, solid-state Silicon Carbide (SiC) Field-Effect Transistor (FET) charge-balanced device, also known as a "Superjunction." These devices have become the industry norm in high-voltage Silicon switching devices, because they allow for more efficient switching at higher voltages and frequencies. The team proposes to demonstrate charge balanced SiC devices for the first time. Their approach will offer scaling up to 15kV while reducing losses for power conversion applications by 10x when compared with existing silicon bipolar devices and competing SiC approaches. This will enable highly efficient, medium-voltage, multi-megawatt power conversion for conventional and renewable energy applications. The technology could dramatically reduce energy consumption and emissions for applications such as solar, wind, mining, oil and gas development, and medical devices. If these efficient devices were widely adopted the technology could save enough energy to power 5.9 million homes annually. It can also have a significant impact on medium voltage drives for high-speed motors and transportation applications, including hybrid and electric vehicles. In rail applications, the higher voltage and higher frequencies afforded by SiC devices could reduce the total energy consumption by as much as 30%.

General Electric

Control Enabling Solutions with Ultrathin Strain and Temperature Sensor System for Reduced Battery Life Cycle Cost

General Electric (GE) Global Research is developing low-cost, thin-film sensors that enable real-time mapping of temperature and surface pressure for each cell within a battery pack, which could help predict how and when batteries begin to fail. The thermal sensors within today's best battery packs are thick, expensive, and incapable of precisely assessing important factors like temperature and pressure within their cells. In comparison to today's best systems, GE's design would provide temperature and pressure measurements using smaller, more affordable sensors than those used in today's measurement systems. Ultimately, GE's sensors could dramatically improve the thermal mapping and pressure measurement capabilities of battery management systems, allowing for better prediction of potential battery failures.

General Motors

Lightweight Thermal Energy Recovery (LIGHTER) System

General Motors (GM) is using shape memory alloys that require as little as a 10°C temperature difference to convert low-grade waste heat into mechanical energy. When a stretched wire made of shape memory alloy is heated, it shrinks back to its pre-stretched length. When the wire cools back down, it becomes more pliable and can revert to its original stretched shape. This expansion and contraction can be used directly as mechanical energy output or used to drive an electric generator. Shape memory alloy heat engines have been around for decades, but the few devices that engineers have built were too complex, required fluid baths, and had insufficient cycle life for practical use. GM is working to create a prototype that is practical for commercial applications and capable of operating with either air- or fluid-based heat sources. GM's shape memory alloy based heat engine is also designed for use in a variety of non-vehicle applications. For example, it can be used to harvest non-vehicle heat sources, such as domestic and industrial waste heat and natural geothermal heat, and in HVAC systems and generators.

GeneSiC Semiconductor

Novel GaN Transistors for High Power Switching Applications

GeneSiC Semiconductor will lead a team to develop high-power and voltage (1200V) vertical transistors on free-standing gallium nitride (GaN) substrates. Bipolar junction transistors amplify or switch electrical current. NPN junction transistors are one class of these transistors consisting of a layer of p-type semiconductor between two n-type semiconductors. The output electrical current between two terminals is controlled by applying a small input current at the third terminal. The proposed effort combines the latest innovations in device designs/process technology, bulk GaN substrate technology, and innovative metal-organic chemical vapor deposition epitaxial growth techniques. If the proposed design concept is successful, it will enable three-fold improvement of power density in high voltage devices, and provide a low-cost solution for mass market power conversion. Moreover, the device can be processed with significantly lower process complexity and cost, as compared to competing silicon carbide and GaN device technologies. GeneSiC will focus on all device development tasks while its partner, Adroit Materials, will focus on the GaN epitaxial growth on bulk GaN substrates, as well as detailed materials characterization according to specifications generated by GeneSiC.

Georgia Tech Research Corporation

Highly Laminated, High-Saturation-Flux-Density Magnetic Cores for On-Chip Inductors in Power Converter Applications

Georgia Tech Research Corporation is creating compact, low-profile power adapters and power bricks using materials and tools adapted from other industries and from grid-scale power applications. Adapters and bricks convert electrical energy into usable power for many types of electronic devices, including laptop computers and mobile phones. These converters are often called wall warts because they are big, bulky, and sometimes cover up an adjacent wall socket that could be used to power another electronic device. The magnetic components traditionally used to make adapters and bricks have reached their limits; they can't be made any smaller without sacrificing performance. Georgia Tech is taking a cue from grid-scale power converters that use iron alloys as magnetic cores. These low-cost alloys can handle more power than other materials, but the iron must be stacked in insulated plates to maximize energy efficiency. In order to create compact, low-profile power adapters and bricks, these stacked iron plates must be extremely thin--only hundreds of nanometers in thickness, in fact. To make plates this thin, Georgia Tech is using manufacturing tools used in microelectromechanics and other small-scale industries.

Georgia Tech Research Corporation

High Performance Metal Organic Frameworks/Polymer Composite Membranes for Carbon Dioxide Capture

A team of six faculty members at Georgia Tech Research Corporation is developing an enhanced membrane by fitting metal organic frameworks, compounds that show great promise for improved carbon capture, into hollow fiber membranes. This new material would be highly efficient at removing CO2 from the flue gas produced at coal-fired power plants. The team is analyzing thousands of metal organic frameworks to identify those that are most suitable for carbon capture based both on their ability to allow coal exhaust to pass easily through them and their ability to select CO2 from that exhaust for capture and storage. The most suitable frameworks would be inserted into the walls of the hollow fiber membranes, making the technology readily scalable due to their high surface area. This composite membrane would be highly stable, withstanding the harsh gas environment found in coal exhaust.

Georgia Tech Research Corporation

EDISON - Efficient DC Interrupter with Surge Protection

Georgia Tech is developing a novel hybrid direct current (DC) circuit breaker that could enable multi-terminal DC power systems. The breaker's mechanical switch enables switching speeds 10 times faster than existing technology, severing the mechanical linkage, while the power electronics-based circuit handles the fault current. A new configuration of the fast switch and solid-state devices/circuits will reduce steady-state losses compared to state-of-the-art hybrid circuit breakers. A new control scheme dramatically reduces the peak fault current levels, enabling more compact packaging and increasing reliability.

Georgia Tech Research Corporation

Modular Thermal Hub for Building Heating, Cooling, and Water Heating

Georgia Tech Research Corporation is using innovative components and system design to develop a new type of absorption heat pump. Georgia Tech's new heat pumps are energy efficient, use refrigerants that do not emit greenhouse gases, and can run on energy from combustion, waste heat, or solar energy. Georgia Tech is leveraging enhancements to heat and mass transfer technology possible in micro-scale passages and removing hurdles to the use of heat-activated heat pumps that have existed for more than a century. Use of micro-scale passages allows for miniaturization of systems that can be packed as monolithic full-system packages or discrete, distributed components enabling integration into a variety of residential and commercial buildings. Compared to conventional heat pumps, Georgia Tech's design innovations will create an absorption heat pump that is much smaller, has higher energy efficiency, and can also be mass produced at a lower cost and assembly time. Georgia Tech received a separate award of up to $2,315,845 from the Department of the Navy to help decrease military fuel use.

Grid Logic, Inc.

Development of a New Generation High-Temperature Superconducting Composite Conductor Delivered at $20/(kA m) with Low AC Loss

Grid Logic is developing a new type of electrical superconductor that could significantly improve the performance (in $/kA-m) and lower the cost of high-power energy generation, transmission, and distribution. Grid Logic is using a new manufacturing technique to coat very fine particles of superconducting material with an extremely thin layer--less than 1/1,000 the width of a human hair--of a low-cost metal composite. This new manufacturing process is not only much simpler and more cost effective than the process used to make today's state-of-the-art high-power superconductors, but also it makes superconductive cables easier to handle and improves their electrical properties in certain applications.

Grid Logic, Inc.

Production of Nanostructured Core/Shell Powders for Exchange Spring Magnet Applications

The Grid Logic team is adapting a form of vapor deposition technology to demonstrate a new approach to creating powerful hybrid magnets. This "physical vapor deposition particle encapsulation technology" utilizes an inert atmosphere chamber, which allows for precisely controlled and reproducible pressure, gas flow, and fluidization conditions for a powder vessel. The team will use this specialized chamber to fabricate nanostructured exchange-spring magnets, which require careful control of material dimension and composition. Nanostructured exchange-spring magnets are composite magnetic materials that use an exchange between soft magnetic materials, which have high saturation magnetization but are easily demagnetized, and hard magnetic materials that are difficult to demagnetize but have lower saturation magnetization and high coercivity. In this case, the team will create magnets consisting of Manganese Bismuth (MnBi) hard magnetic core particles with nanometer-scale Cobalt (Co) soft magnet shells. If successful, the team will demonstrate a process for producing: 1) A hard magnet core particle capable of withstanding a strong external magnetic field without becoming demagnetized; and 2) A soft magnet shell providing high magnetic saturation (i.e. maximum magnetization due to an external magnetic field). By combining precise control of nano-scale layering, material ratios, and material interfaces the project could develop a magnet that rivals permanent magnets made from rare earth elements. As an ARPA-E IDEAS project, this early stage research will provide proof of concept showing that the particle encapsulation system developed in this project can enable large-scale, cost-efficient production of composite magnets that do not require rare earth elements.

Harvard University

GaN NMR Spectrometer Integrated Circuits Towards Broadly Distributed On-line Monitoring and Management of Subsurface Oil/Gas Reservoirs and Downstream

Harvard University will develop a compact NMR system to provide detailed information on composition and environment in subsurface oil exploration and production. By building the electronics for the system with gallium-nitride-based integrated circuitry, the team seeks to greatly miniaturize the NMR system, reducing both the volume and weight by two orders of magnitude, and enabling it to withstand the high temperatures found in a deep drill hole. The proposed technology will place the majority of the essential NMR electronics on a single board. This will reduce the complexity and bulkiness of commercially available NMR logging tools, driving down the system's cost and size.

HRL Laboratories, LLC

Gallium-Nitride Switch Technology for Bi-Directional Battery-to-Grid Charger Applications

HRL Laboratories is using gallium nitride (GaN) semiconductors to create battery chargers for electric vehicles (EVs) that are more compact and efficient than traditional EV chargers. Reducing the size and weight of the battery charger is important because it would help improve the overall performance of the EV. GaN semiconductors process electricity faster than the silicon semiconductors used in most conventional EV battery chargers. These high-speed semiconductors can be paired with lighter-weight electrical circuit components, which helps decrease the overall weight of the EV battery charger. HRL Laboratories is combining the performance advantages of GaN semiconductors with an innovative, interactive battery-to-grid energy distribution design. This design would support 2-way power flow, enabling EV battery chargers to not only draw energy from the power grid, but also store and feed energy back into it.

HRL Laboratories, LLC

Low-Cost Gallium Nitride Vertical Transistor

HRL Laboratories will develop a high-performance, low-cost, vertical gallium nitride (GaN) transistor that could displace the silicon transistor technologies used in most high-power switching applications today. GaN transistors can operate at higher temperatures, voltages, and currents than their silicon counterparts, but they are expensive to manufacture. HRL will combine innovations in semiconductor material growth, device fabrication, and circuit design to create its high-performance GaN vertical transistor at a competitive manufacturing cost.

iBeam Materials, Inc.

GaN LEDs on Flexible Metal Foils

iBeam Materials is developing a scalable manufacturing method to produce low-cost gallium nitride (GaN) LED devices for use in solid-state lighting. iBeam Materials uses an ion-beam crystal-aligning process to create single-crystal-like templates on arbitrary substrates thereby eliminating the need for small rigid single-crystal substrates. This process is inexpensive, high-output, and allows for large-area deposition in particular on flexible metal foils. In using flexible substrates, in contrast to rigid single-crystal wafers, the ion-aligning process also enables roll-to-roll (R2R) processing of crystalline films. R2R processing in turn simplifies manufacturing scale-up by reducing equipment footprint and associated labor costs By fabricating the LED directly on a metal substrate, one "pre-packages" the LED with the reflector and the heat sink built-in. This significantly reduces cost, simplifies packaging and allows a pick-and-place (P&P) technology to be replaced with printing of LEDs.


Subscribe to Efficiency