Sorry, you need to enable JavaScript to visit this website.

High-Speed Microturbine with Air Foil Bearings for Residential CHP

Mohawk Innovative Technology, Inc. (MiTi)

High-Speed Microturbine with Air Foil Bearings for Residential CHP

Program: 
ARPA-E Award: 
$2,500,000
Location: 
Albany, NY
Project Term: 
03/15/2016 to 06/09/2016
Project Status: 
CANCELLED
Technical Categories: 
Critical Need: 
In 2013, centralized U.S. power plants had an average electricity generation efficiency of only 33%, wasting 67% of primary energy as heat and emitting 2 billion tons of CO2, about 38% of U.S. total emissions. Further, 6% of electricity is generally lost during transmission and distribution from the power plant to the customer. An alternative to centrally produced power is distributed generation, in which electricity is generated at the point of use. Residential combined heat and power (CHP) systems can burn natural gas to produce electricity for a home while also using the waste heat for space and water heating. The potential energy efficiency for CHP systems is more than 80% and significant adoption of such systems would enable dramatic reductions in primary energy use and concurrent CO2 emissions. However, usage of small CHP systems is not widespread because systems currently on the market are limited by high price, low efficiency, and short lifetime. The GENSETS program seeks to develop 1 kW (electric) CHP generators that have high fuel-to-electricity generation efficiency, long life, low cost, and low emissions.
Project Innovation + Advantages: 
Mohawk Innovative Technology, Inc. (MiTi) and its partners at the University of Texas at Austin and Mitis SA will develop a 1 kW microturbine generator for residential CHP based on MiTi's hyperlaminar flow engine (HFE) design. Key innovations of the design include highly miniaturized components operating at ultra-high speeds and a viscous shear mechanism to compress air that is mixed with natural gas and undergoes a flameless combustion process that minimizes emissions. The hot combustion gas drives the turbine and generator to produce electricity and heat water for household use. Besides using the viscous shear-driven compressor and turbine impellers and flameless combustion, the turbogenerator uses permanent magnet generator elements and air foil bearings with very low power loss, all of which are combined into a highly efficient, low emission, and oil-free turbomachine for residential combined heat and power that requires little or no maintenance.
Potential Impact: 
If successful, MiTi's project will facilitate development and commercialization of economical, efficient, and durable CHP systems for residential use. These advancements support progress toward ARPA-E's overall goals as follows:
Security: 
Innovations developed in this project could help households and businesses become more energy self-reliant and less susceptible to energy-related outages through distributed, local generation of power and heat.
Environment: 
Widespread adoption of high-efficiency residential CHP systems could decrease overall primary energy consumption and therefore reduce CO2 emissions associated with electricity generation by up to 10%.
Economy: 
Cost-effective natural gas-fueled residential CHP systems could offer consumers lower electricity and heating bills.
Contacts
ARPA-E Program Director: 
Dr. David Tew
Project Contact: 
Hooshang Heshmat
Partners
University of Texas, Austin
MITIS, SA
Release Date: 
6/18/2015