Creating Hardened And Durable fusion first Wall Incorporating Centralized Knowledge
Program Description:
CHADWICK will pursue the discovery of transformational first-wall materials that will maintain performance over the 40-year design lifetime of a fusion power plant. The goal of the CHADWICK program is to spur the innovation and production of new materials that can maintain room temperature ductility, high thermal conductivity, low activation, dimensional stability, tritium retention, and low plasma erosion after irradiation. This program goes beyond optimization of known alloys to provide a comprehensive wide-ranging survey and analysis of new material chemistries and manufacturing processes by reimagining what is possible in fusion materials.
The CHADWICK program comprises three technical categories. Category A projects will target plasma-facing component materials, Category B teams will validate structural materials, and Category C projects will support analysis and facilitate communications with end users for Category A and/or B teams.
If successful, new materials developed by the CHADWICK program could increase first-wall lifetime by a factor of 10. These materials could be essential to the deployment of sustained and economical fusion energy.
Innovation Need:
In most fusion power systems, fusion reactions are physically contained by the first wall. The first wall bears the mechanical load and protects the components from the extreme heat and highly energetic charged and neutral particles. The safety and structural performance of the first wall are compromised over time by significant exposure to high-energy neutrons and heat flux. As fusion energy advances towards commercial deployment, the lifetime and maintainability of first-wall materials will become a major challenge for the commercial viability of fusion power plants.
Commercial materials with known high-temperature resistance can become brittle and swollen under irradiation. Yet materials that exhibit high irradiation resistance may show low thermal conductivity or high activation. Finding a material that has the most optimized performance for a fusion first-wall is a major scientific and engineering challenge.
Potential Impact:
Security:
Environment:
Economy:
Contact
Project Listing
• Commonwealth Fusion Systems (CFS) - Co-Optimization of an Integral, Layered Materials Solution for Compact Tokamak Vessels
• ExoFusion - Novel Liquid Metal Plasma Facing Component Alloys
• Johns Hopkins University - Complexion Engineered Nanocrystalline Tungsten Alloy Plasma Facing Materials for Long-Pulse Tokamak Operation
• Lawrence Livermore National Laboratory (LLNL) - Design of Complex High-Performance Armor Materials
• Pacific Northwest National Laboratory (PNNL) - Ferritic and Vanadium Alloys with Nanoparticle Strengthening for Fusion (FAVA-NSF)
• Savannah River National Laboratory - Machine Learning for Alloy Discovery Coupled with Geometric Optimization for Functionally Graded Liquid Metal First Wall
• Stony Brook University - Design and Development of Composited Low-Activation UHTC Materials for Very High Temperature First Wall Application
• Texas A&M Engineering Experiment Station - Batch-wise Improvement in Reduced Design Space using a Holistic Optimization Technique for FUSion Environments (BIRDSHOT-FUSE)
• University of California, San Diego (UC San Diego) - High Flux Plasma-Materials Interaction Testing for Rapid Fusion Materials Development
• University of Illinois, Urbana-Champaign (UIUC) - Centralized and On-Demand Radiation Transport and Techno-Economics (CORTEX) for Fusion Material Engineering
• University of Illinois, Urbana-Champaign (UIUC) - GRADED: Gradient composites with Radiation Amorphization-enabled Dimensional stability and Energy Dissipation
• University of Kentucky - Combinatorial Modeling, Screening, and Development of Tungsten-Ceramic Composites with Gradient Microstructure for Improved Radiation-Tolerant Plasma Facing Materials