AlloyBot: Autonomous Platform to Develop Alloys for Energy and Propulsion Technologies 100x Faster

Default ARPA-E Project Image

Program:
IGNIITE 2024
Award:
$500,000
Location:
Madison, Wisconsin
Status:
ACTIVE
Project Term:
11/01/2024 - 10/31/2026
Website:

Technology Description:

Sebastian Kube is an assistant professor in materials science and engineering at the University of Wisconsin–Madison. The objective of Kube’s project is to build an autonomous laboratory platform, “AlloyBot,” which will develop new structural alloys for energy and propulsion technologies. AlloyBot will synthesize and test 100 new alloy compositions per week with minimal human assistance.

Contact

ARPA-E Program Director:
Dr. Laurent Pilon
Project Contact:
Prof. Sebastian Kube
Press and General Inquiries Email:
ARPA-E-Comms@hq.doe.gov
Project Contact Email:
Sebastian.Kube@wisc.edu

Related Projects

• Battelle Energy Alliance (Idaho National Laboratory) - Performance of Brazed Materials for Molten Salt Energy Technologies
• ChemFinity Technologies - Tunable Porous Polymer Networks with Unprecedented Efficiency in Recovering Critical Metals
• Duke University - Upgrading Plastic Waste into Low-Cost Porous Adsorbents for Direct Air Capture
• Lawrence Berkeley National Laboratory (LBNL) - Carbon-Negative and Ambient Production of Fertilizer Precursor
• Lawrence Berkeley National Laboratory (LBNL) - C1 Bioconversion Platform: Integrating Acetogenic Consortia for Circular Economy Solutions in Sustainable Fuel Production, Industrial Efficiency, and Decarbonization
• Michigan State University - Robotic 3D Bioprinting of Entire Building Structures Using Biogenic Concrete
• Michigan State University - Optically Powered Ultra-high-Speed (OPUS) Wound-Field Synchronous Generators
• National Renewable Energy Laboratory (NREL) - Electrochemically Looping Adsorptive Heat Pumps for Next-Generation Building Decarbonization
• National Renewable Energy Laboratory (NREL) - Mixed Polyester Deconstruction & Monomer Recovery to Enable a Circular Bioeconomy
• National Renewable Energy Laboratory (NREL) - BUILD’EM: Chemistry, Performance, and Path to Market of a Cement-less Construction Material
• Oak Ridge National Laboratory (ORNL) - Ductile Bulk Ionic Glasses for Electric Vehicle Batteries (BIGBATT)
• Oak Ridge National Laboratory (ORNL) - Supercritical Carbon Dioxide-Leveraged Redox Flow Batteries (SUPERCOOL-RFB)
• Peregrine Hydrogen - Advanced Electrolysis Architectures for Low-Cost Green Hydrogen
• Rensselaer Polytechnic Institute - Critical Metal-Free, Conversion-Type Solid-State Batteries for Advanced Air Mobility
• Syracuse University - Ultra-High Power Photoneutralization Cavity for Neutral Beam Injection in Fusion Reactors
• University of California, Berkeley (UC Berkeley) - High-Performance, Modular Piezoelectric Components for Miniaturized Power Conversion
• University of California, Santa Barbara (UC Santa Barbara) - Solar Thermal Membrane Desalination via Thin-film Phase Change
• University of Nebraska, Lincoln (UNL) - Multicell Electrical-Transient-Accelerated Press-Pack Modules (METAPAK)
• University of Washington (UW) - Development of an Adaptive Catalytic Reactor to Store Intermittent Green Hydrogen Using Plastic Waste
• University of Wisconsin-Madison (UW-Madison) - AlloyBot: Autonomous Platform to Develop Alloys for Energy and Propulsion Technologies 100x Faster
• University of Wisconsin-Madison (UW-Madison) - Direct High-Temperature Electrochemical Hydrogenative Depolymerization for Waste Plastic Upcycling
• University of Alabama - Tailoring Bipolar Membrane Interfaces to Boost Direct Borohydride Fuel Cell Performance for Marine Transportation Applications
• University of California-Irvine - High-Entropy Nanodisks by Ultrafast Electrified Vapor Deposition for Hydrogen Production

Release Date:
11/09/2023