Performance of Brazed Materials for Molten Salt Energy Technologies

Default ARPA-E Project Image

Program:
IGNIITE
Award:
$500,000
Location:
Idaho Falls, Idaho
Status:
ACTIVE
Project Term:
06/21/2024 - 06/20/2026
Website:

Technology Description:

Michael Woods is a research scientist at Idaho National Laboratory with over ten years of experience in molten salt experimentation. Woods’ project will investigate the use of brazing for joining salt-facing materials for molten salt energy technologies, including nuclear molten salt reactors and thermal energy storage systems.

Contact

ARPA-E Program Director:
Dr. Laurent Pilon
Project Contact:
Dr. Michael Woods
Press and General Inquiries Email:
ARPA-E-Comms@hq.doe.gov
Project Contact Email:
Michael.woods@inl.gov

Related Projects

• Battelle Energy Alliance (Idaho National Laboratory) - Performance of Brazed Materials for Molten Salt Energy Technologies
• ChemFinity Technologies - Tunable Porous Polymer Networks with Unprecedented Efficiency in Recovering Critical Metals
• Duke University - Upgrading Plastic Waste into Low-Cost Porous Adsorbents for Direct Air Capture
• Lawrence Berkeley National Laboratory - Carbon-Negative and Ambient Production of Fertilizer Precursor
• Lawrence Berkeley National Laboratory - C1 Bioconversion Platform: Integrating Acetogenic Consortia for Circular Economy Solutions in Sustainable Fuel Production, Industrial Efficiency, and Decarbonization
• Michigan State University - Robotic 3D Bioprinting of Entire Building Structures Using Biogenic Concrete
• Michigan State University - Optically Powered Ultra-high-Speed (OPUS) Wound-Field Synchronous Generators
• National Renewable Energy Laboratory - Electrochemically Looping Adsorptive Heat Pumps for Next-Generation Building Decarbonization
• National Renewable Energy Laboratory - Mixed Polyester Deconstruction & Monomer Recovery to Enable a Circular Bioeconomy
• National Renewable Energy Laboratory - BUILD’EM: Chemistry, Performance, and Path to Market of a Cement-less Construction Material
• Oak Ridge National Laboratory - Supercritical Carbon Dioxide-Leveraged Redox Flow Batteries (SUPERCOOL-RFB)
• Oak Ridge National Laboratory - Ductile Bulk Ionic Glasses for Electric Vehicle Batteries (BIGBATT)
• Peregrine Hydrogen - Advanced Electrolysis Architectures for Low-Cost Green Hydrogen
• Rensselaer Polytechnic Institute - Critical Metal-Free, Conversion-Type Solid-State Batteries for Advanced Air Mobility
• Syracuse University - Ultra-High Power Photoneutralization Cavity for Neutral Beam Injection in Fusion Reactors
• University of Alabama - Tailoring Bipolar Membrane Interfaces to Boost Direct Borohydride Fuel Cell Performance for Marine Transportation Applications
• University of California, Berkeley - High-Performance, Modular Piezoelectric Components for Miniaturized Power Conversion
• University of California, Santa Barbara - Solar Thermal Membrane Desalination via Thin-film Phase Change
• University of California-Irvine - High-Entropy Nanodisks by Ultrafast Electrified Vapor Deposition for Hydrogen Production
• University of Nebraska-Lincoln - Multicell Electrical-Transient-Accelerated Press-Pack Modules (METAPAK)
• University of Washington - Development of an Adaptive Catalytic Reactor to Store Intermittent Green Hydrogen Using Plastic Waste
• University of Wisconsin–Madison - AlloyBot: Autonomous Platform to Develop Alloys for Energy and Propulsion Technologies 100x Faster
• University of Wisconsin–Madison - Direct High-Temperature Electrochemical Hydrogenative Depolymerization for Waste Plastic Upcycling

Release Date:
11/09/2023